Home » Pressure Products » Pressure Calibrators » Fluke 6532-200M-B Deadweight Tester 30K PSI

Fluke 6532-200M-B Deadweight Tester 30K PSI

(6532-200M-B)

Mfg: Fluke®

Price Each: $52,840.00

Quantity:

ELECTRONIC DEADWEIGHT TESTER, 4 TO 200 MPA (600 TO 30K PSI)

The Fluke Calibration E-DWT-H is a modern version of a traditional deadweight tester.
Designed to replace mechanical, piston-cylinder, and weight-based deadweight testers; it's a lighter, easier-to-use alternative that is at home in the lab or in the field.

The E-DWT-H is a complete hydraulic pressure calibration system that combines the features and convenience of digital measurement.
The E-DWT-H offers precision, low measurement uncertainty and the stability over time of a conventional deadweight tester without the inconveniences associated with the piston-cylinders, weights, hand pumps, and interconnecting plumbing.
There are no weights to load and unload and no need to correct for local gravity or ambient temperature.
The AutoTest function allows operators to quickly define test points and adjust all of the range-dependent settings with a single function.

The E-DWT-H can interface with a PC or laptop to allow for automated data acquisition while recalibration is possible via software.
The E-DWT-H includes high quality hardware that allows easy system fill and prime, pressure generation and precise control up to 200 MPa (30,000 psi).
The unit provides one year measurement uncertainty of ±0.02% of reading. It can be configured to provide this uncertainty from its full scale down to 1% of its range.

An included vacuum fill kit allows the E-DWT-H to be filled with the user's choice of compatible fluid, while eliminating problematic air pockets from the test circuit.
Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches.

Features

E-DWT-H one year measurement uncertainty is ± 0.02% of reading with ranges up to 30,000 psi.
No weights to load and unload or regularly send out for calibration
No need to know and correct for local gravity or ambient temperature
No piston-cylinder changes; switch Q-RPT ranges in seconds
Not sensitive to level or vibration
Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses
Operates in any unit of measure while deadweight tester is typically limited to the pressure unit stamped on the mass
Up to $3,000 in FREE gifts

Technical Resources